Innokin Proton Mini Kit Ajax Tank 2ml

£43.99
£43.99
Tax included. Shipping calculated at checkout.

Earn [points_amount] when you buy this item.

4.9 Star Reviews

Description

Innokin Proton Mini Mod with Ajax Tank Starter Kit

Upgrade your vape experience with the Innokin Proton Mini 120W Vaporizer and Ajax Tank. This kit features a powerful Proton chip-set for fast coil heating, delivering intense flavor and vapor with Plex3D-Matrix coils.

Advanced functions like temperature control and Wattage Curve cater to power users, while safety features like overheat protection ensure a secure experience. The 3400mAh battery charges rapidly with 2Amp Quick Charge. Operate the device effortlessly with the colorful 1.45’ TFT screen and user-friendly joystick.

Innokin Proton Mini Ajax Specs

  • Kit Size = 120 x 45 x 30mm
  • Mod (battery) size = 73 x 45 x 30mm
  • Tank size = 47 x 24mm (excluding 510 pin)
  • Battery Capacity = 3,400mAH 3.7V (internal battery)
  • Power Range= 6W – 120W
  • Max Voltage = 7.5V
  • E-liquid Capacity = 2ml / 5ml with bubble glass
  • Resistance Range =0.1 – 3.5Ohms
  • Charging rate = 2A

Features

  • Custom TCR -Temperature control
  • Custom Wattage curves (per 0.5 seconds)
  • Bypass mode
  • 3 Coil Setting Memory
  • Custom Screensavers (Free PC software Needed
  • Adjustable overtime Cut-off Protection
  • Adjustable screen brightness/ timeout / Dim time
  • Adjustable temperature: Celsius / Fahrenheit
  • Time and Date display
  • Over-heat protection
  • Over-discharge protection
  • Short Circuit Protection
  • Joystick Navigation button

Innokin Proton Mini Ajax Quick Start

To turn the device on, click the fire button (side bar) 3 times.

How To Fill The Innokin AJAX Tank

AJAX Tank Fill Port

Filling the tank is as simple as it can be, but to cover all bases…

  • Look at the top of the tank, notice the arrow.
  • Place your thumb/finger on the arrow.
  • Push in the direction that the arrow is pointing.
  • Fill the tank with E-Liquid though the hole that appears.
  • Close the top of the tank buy pulling it back.

How To Change The Innokin Proton Mini Ajax Coil

Liquid loss: look into the tank, you’ll notice 4 arches / holes around what looks like the coil.

That’s not actually the coil, it’s part of the tank.

While the tank is upside down, whatever is not below the arches will leak.

  • Turn the tank upside down
  • Grip the “top half” of the tank (the side now facing down)
  • Grip the adjustable airflow and unscrew it (turn it anti-clockwise).
  • Grip the bottom of the coil and pull it out.
  • Push the new coil fully in.
  • Replace the bottom of the tank (the adjustable airflow)
  • Fill the tank and leave it for 5 minutes before using to allow the liquid to soak into the coil.

In The Box

  • 1 x Proton Mini Mod
  • 1 x AJAX Tank 2ml
  • 1 x 0.16ohm AJAX Plex3D Coil (Pre-installed)
  • 1 x 0.35ohm AJAX Plex3D Coil
  • 1 x Extra Glass (bubble Glass)
  • 1 x Spare O-Ring Set
  • 1 x Micro USB Cable
  • 1 x Quick Start Guide
  • 1 x Warning Booklet